Each fuel dryer is supplied with an ignitor that produces a flame from the fuel supply. A damaged ignitor prevents the dryer from producing any warmth, thus making drying your clothes not possible. Changing a damaged ignitor isn’t actually as exhausting as it could appear, however it does require some studying and planning. This text will give the readers some fundamental steps to execute substitute of a damaged dryer ignitor.

Earlier than continuing with the repair and substitute steps, just remember to get the proper ignitor on your dryer. To do that, test and be aware of your dryer model number. You will have this data (unit model number) in your buy at an equipment repair retailer. The model number will help the technician within the retailer to seek out the correct elements on your particular dryer unit. You will need to keep in mind that the weather on the ignitor are very delicate, correct dealing with is a should. Among the steps beneath might get too technical, so if you’re feeling a bit uncomfortable, you may all the time name your trusted repair man to do the job 엘지렌탈.

Step 1
Disconnect the dryer’s energy wire from its electrical outlet. Shut the fuel supply valve on the fuel line resulting in the diver.

Step 2
Carry the lint screen out off its compartment. Take away the 2 screws subsequent to the lint screen compartment.

Step 3
Insert a putty knife into the hole between the highest panel and the entrance of the dryer. Press the putty knife into the highest panel clips 2 inches from every entrance nook.

Step 4
Disconnect the wiring harness that connects to the flame sensor on the burner can. The wirings might be simply eliminated utilizing your palms.

Step 5
Utilizing a wrench, take away the screws that maintain the burner meeting bracket to the bottom of the dryer. Pull the burner meeting out.

Step 6
The burner meeting is related to the igniter by a wire, disconnect this wire. Take away the remaining screws that maintain the igniter to the meeting. Then pull off the faulty ignitor and substitute with a brand new one. Reverse steps 5 to 2.

Lastly, flip the dryer on to test whether it is working correctly. Make closing setting configurations and tightening of the connections. After if all the pieces is working easily, reposition the dryer again its place after which plug the dryer again to the wall outlet.